BERGER ROAD MARKING REFLECTIVE PAINT WHITE 1 GALLON

$285.88

Product Description

A durable, specially formulated coating that has been designed for use in the tropics.
Easy to apply using a brush or roller.
Can be used on interior and exterior concrete and asphalt, road surfaces, runways, parking lots, curb walls, play areas, speed humps and traffic islands.

Excellent visibility at night due to back reflection by glass beads.
Fast drying and resistant to traffic in 1 hour.
Hardwearing and good adhesion resistance.
Excellent durability.
Good inter-coat adhesion which eliminates the need to remove intact old paint.
Resistant to gasoline, water, oil, dilute acids and alkalis and mineral oils.
Coverage: 200 sq.ft per 4″ wide line, depending on the surface conditions, 17.4 sq.ft/L.
Touch dry time (at 25°C): 15 mins.
Recoat dry time (at 25°C): 1 hour.
Colours: White, Red, Yellow.
Finish: Low Sheen.

For asphalt and concrete roads, ensure surfaces are free from efflorescence and algae.
Wire brushing or water washing is recommended to remove dust from the surface.
New concrete surfaces should be allowed to cure for 6 weeks before coating.
New asphalt surfaces should be allowed to cure for 3 months before coating to prevent bleeding through the coating.
If you paint before 3 months, there arises the possibility of bleeding, that can cause white and yellow coatings to grey.